Underwater and land metal detector Fortune PRO with an immersion depth of up to 10 m. Underwater search is one of the most promising types of metal detecting in terms of finds.
The underwater metal detector Fortuna PRO is a metal detector that is able to search for metals both in the ground and when submerged under water within a range of up to 10 m. This is a full-fledged ground metal detector. Its capabilities are much higher than conventional land-based metal detectors, because with it you can conduct searches in water at shallow depths and fully immerse yourself in water.
Underwater Fortuna PRO is a versatile metal detector for searching on the ground, on the beach and under water. Underwater Fortuna PRO is compatible with coils of different frequencies, which makes it versatile in operation. There is also a headphone output. Immersion depth in water: up to 10 m.
Search depth under water: up to 2 m. Purpose: ground and underwater metal detector. Discrimination visual indication: VDI number (VDI), synograph, dynamic scale of signal strength. Target voice: 90-tones, 4-tones, dual-tone, volume control. Signal processing speed: very fast.
Sensor balance drift compensation: automatic. 6.1 x 3.1 cm OLED display. The ability to mask unwanted metal. Tuning the device to the frequency of the existing sensor. Possibility of connecting a search sensor: 4-20 kHz.Number of profiles for sensors: 3. Case dimensions: 140 × 98 × 30 mm. It is equipped with a waterproof Aqua hermetic box, which reliably protects MD from water ingress. The hermobox has thick walls and is assembled with great care.
The MD display is included in the hermetic box box without gaps and is fixed in it as tightly as possible. The control unit is guaranteed to be protected from snow, rain, dirt and physical damage when dropped from a height or in the event of the unit itself hitting the ground, etc. The main parameters of this assembly. Li-ion battery 2200 (real capacity) mAh 3.7V. Collapsible, adjustable rod, lower part - impact-resistant plastic, upper part - high-strength aluminum, coated with factory powder paint.High-quality board, factory-made, double-sided, with a protective mask and metallized holes. Fully equipped, the unit is powered by 3.7 V (18650 lithium battery 2200 mAh).
If the power supply will be made of its own, then it is possible from 2 to 9 V. Power connector for mic 325 2pin plug. The pinout of the sensor connector is as follows. Sensor frequency: 6.7 kHz (default). Spacing between TX-RX: 1.7-1.8 kHz.Waterproof hermetic box (box + cover) for the control unit. Headphone jack (headphones not included). Functional block of the device.
Therefore, open and inspect the parcel immediately upon receipt (in the carrier or courier). If suddenly something broke, crumpled or lost appearance, be sure to make on the spot with the employees of the carrier company the relevant act. Only in this case, we can help you. Quality, reliability, good depth indicators, ease of use! The item "Underwater and ground metal detector Fortune PRO with an immersion depth of 10m" is in sale since Wednesday, October 21, 2020.This item is in the category "Business & Industrial\Test, Measurement & Inspection\Test Meters & Detectors\Metal Detectors". The seller is "miroshnichenkometall_1" and is located in Kharkiv. This item can be shipped worldwide.