SmallRig Handheld Ring/Plate/accessories for Ronin/Ronin M/Ronin MX Stabilizer

2068 Handheld Ring for Ronin/Ronin M/Ronin MX. 2214 Mounting Plate for DJI Ronin S. 1 x Mounting Plate for. 1860 Clamp for DJI Ronin M/Ronin MX. 1x 25mm Rod Clamp 1860. 1914 Support Feet for DJI Ronin-M/ Ronin-MX Grip/Freefly MoVI. 2 x Support Foot for DJI Ronin M & Ronin MX Grip/Freefly MoVI Ring.

1907 Rod Clamp for DJI Ronin M/MX. 1 x 1 Rod Clamp. 1878 Ballhead for DJI Ronin M/Ronin MX/Freefly MOVI.

1 x 25mm rod clamp 1860. 1 x articulating ball head. SmallRig Handheld Ring for Ronin/Ronin M/Ronin MX Stabilizer 2068. SmallRig Handheld Ring 2068 is designed for Ronin/Ronin M/Ronin MX Stabilizer. It could provide more mounting possibilities and DIY options.

It is compatible with Ronin/Ronin M/Ronin MX Stabilizer. QR mount is anti-off designed for security. QR mount on the top of handheld ring comes with 1/4''-20 and 3/8''-16 threaded holes whereby top handle and QR plate could be attached.

The corners are equipped with NATO rails and Arri locating points and together with 1/4''-20 and 3/8''-16 threaded holes for external accessories. Handheld Ring could mount Support Feet 1914 at the bottom to sit on the ground. It includes four 25mm carbon fiber rods , 4 corners and a QR mount.

Threaded holes on the top of QR mount could attach NATO Handle 2084, or could be mounted with QR plate for tripod. 25mm rod is compatible with any accessories with 25mm rod clamp and DJI thumbwheel controller as well. The corners are equipped with NATO rails and Arri locating points and together with 1/4"-20 and 3/8"-16 threaded holes for external accessories, like magic arm, single rod clamp and cold shoe for monitor, LED light and microphone etc. 2 foam handles on both sides could increase the force of friction for more comfortable handgrip experience.

Product Dimensions: 527x65.5x528.5 mm. Material(s): Aluminum Alloy/Carbon Fiber/Foam. SmallRig Mounting Plate for DJI Ronin S 2214.

Compatible with DJI RoninS Handheld Gimbal. Multiple 1/4-20 threaded holes for accessory attachment.

Features a nato rail to compatible with nato clamp accessories. Arri 3/8holes for accessory with arri locating pins.

Note: The max load is 1.5kg. SmallRig Mounting Plate for DJI Ronin S 2214 is designed to provide multiple mounting holes for accessories attachment. It is fixed on the side of Ronin S via two M4 screws after taking off the small DJI plate which covers the electronic contacts.

There are multiple 1/4"-20 threaded holes and one 3/8"-16 threaded hole for magic arm or cold shoe mount for monitor and microphone. It also allows for mounting any accessories with nato rail directly because there is a nato rail on the plate. Product Dimensions: 39.5 X 44X 13mm.

SmallRig 25mm Rod Clamp for DJI Ronin M/Ronin MX/Freefly MOVI 1860 is aiming at mounting additional accessories on the DJI Ronin series, like Ronin M, Ronin MX and any other items with 25mm or 1 rods. EVF Mount, Ball Head, Cold Shoe mount can be installed by screws on arrays of 1/4'' and 3/8'' screw holes.

DJI Ronin M, Ronin MX, Freefly MOVI stabilizers and any other 25mm or 1 rods. Quick clamp on the 25mm rod.

Optional screw holes for other mounts assembled. SmallRig 25mm Rod Support Feet for DJI Ronin M & Ronin MX Grip/Freefly MoVI Ring 1914. SmallRig 25mm Rod Support Feet 1914 is exclusively designed for DJI Ronin M & Ronin MX Grip/Freefly MoVI Ring. 25mm rod clamp locks Ronin M/MX Grip/MOVI Ring, so that it can stand on the ground firmly. Cold shoe attaches magic arm and then attach monitor, so that the cameraman could check the screen during handheld shooting.

1/4'' threaded holes could attach magic arms and then monitor. 1/4'' and 3/8'' threaded holes could attach quick release plate and sit on tripod. The rubber cushions at the bottom are anti-sliding, making Ronin M & Ronin MX Grip / Freefly MoVI Ring stand on the ground firm.

Wingnuts or screws could be applied to lock as per your needs. Support feet could be folded along with the Ronin grip and put into the bag. 25mm rod clamp locks Ronin M/MX Grip/MOVI Ring.

Cold shoe attaches magic arm and then attach monitor. Pads at the bottom are anti-sliding. Wingnuts or screws applied to lock as per your needs. Note: The payload of the support feet is 5kg, if you intend to use a camera such as Sony FS5 or Canon C200 on your gimbal stabilizer , please use the Allen Wrench insread of Wingnuts to tighten the feet.

DJI Ronin M & Ronin MX Grip/Freefly MoVI Ring. Product Dimensions: 147x 46x 28mm. Package Dimensions: 200 x 140 x40mm.

SmallRig 1(25.4mm) Rod Clamp to Arri Rosette for DJI Ronin M/MX 1907 is designed to attach Arri standard rosette handgrip or Sony FS5 handgrip after attaching Grip Rosette Mount 1867. After it is mounted with the handgrip, its length and tilt angle are the same with those of the original handgrip of Ronin M/MX.

Thus, it makes holding more comfortable. The M6 thread could be a female and a male head. It comes with several 1/4''-20 threads on the top and side, which allows to mount more accessories. Fits the original handle bar of Ronin M/MX. Comfortable holding with 10°tilt angle.

Equipped with 1/4''-20 threaded holes for accessories attachment. Compatible with Arri standard handgrip.

Ronin M/MX , Freefly MOVI stabilizers and any 25.4mm or 1 rods. SmallRig V-Lock Assembly Kit 1846 is a quick release set based on the standard V-Lock.

It comes with a Female V-Dock and a Male V-Lock. There are multiple mounting holes and grooves on the Female V-Dock, and you can attach this assembly directly to a SmallRig camera cage kit, SmallRig monitor frame, or SmallRig shoulder pad mount. In addition, you can mount this assembly kit to SmallRig 25mm rod clamp 1860 which is designed for DJI Ronin M/MX; with this setup, you can put your V-Mount batttery on top of the Ronin to power all the accessories, which minimizes camera weight on gimbal. The two integrated protruding portions prevent it from twisting when V-Mount battery attached. The V-Lock with three M3 holes can be used as a replacement of the original V-Lock comes with the V-Mount battery.

NOTE: This product is not compatible with PAGlink PL96T Time Battery. SMALLRIG Double Ballhead with 25mm Rod Clamp for DJI Ronin M/Ronin MX/Freefly MOVI 1878 includes an articulating double ballhead and a 25mm rod clamp 1860.

You can attach the 1 rod to the existing rail clamp system. Monitor can be mounted with a 1/4'' thread. The articulating ball head allows you to adjust the monitor in different positions for application flexibility. Easy to attach and detach. Parcel will be sent from respective warehouse according to item location.

From DE, DHL domestic packet service. From AU, AU post E-parcel service.

From China, China post or express method is available. But We have 2 warehouses in US. One is in CA, the other one is in KY. Usually we will dispatch the parcel to you from the nearest warehouse according to your location. But sometimes if there is no stock in CA, we have to send from KY warehouse, vice versa, pls note!

We are based in China, and we have warehouses in United States, United Kingdom, Germany and Australia. For consumers who are not in countries above we will send the item from China. We have been in this field for over 9 years. The item "SmallRig Handheld Ring/Plate/accessories for Ronin/Ronin M/Ronin MX Stabilizer" is in sale since Wednesday, September 26, 2018. This item is in the category "Cameras & Photo\Tripods & Supports\Stabilizers".

The seller is "hdjoys" and is located in Shenzhen. This item can be shipped worldwide.

Type: Handheld Ring
Brand: SmallRig
MPN: Does Not Apply
Country/Region of Manufacture: China