THE ALL NEW IMPROVED NIGHT SABER ALPHA V2 PISTOL LAMP. Fantastic lamp for lamping or running dogs.
In various beam profile & colours. Options currently available (please select via above menu). Bare Alpha pistol lamp (Lamp ONLY in chosen LED colour). Or a Alpha pistol lamp kit.
Containing a Hard case boxed Alpha + charger & single 5500ma battery. Other LED options are available in our other item!By popular demand the ALPHA is back & its a beast! Key upgrades & points on the Night saber alpha V2 below. High performance that will fit in your pocket. New improved battery compartment that will accept a 18650 or 26650 battery. New easy fit battery cap. New low light spill LED pill system. New electronics/wiring for improved reliability & performance. New higher power LED emitters. DUAL power modes BOTH Single mode ON/OFF & Triple mode (LOW/MED/HIGH) selectable at the lamp. SINGLE & TRIPLE MODE SELECTION.
To toggle between SINGLE & TRIPLE mode, quickly half press/flash the on/off switch 3x with the lamp in the ON position. In triple mode the mode memory function is activated by switching off the lamp for a couple of seconds in the required power mode. Featuring an all new 67mm fast focus aspheric lens/head, this lamp has the ability to offer a wide flood light effect for short to medium ranges (very handy for picking up) and a pin point zoom for long range illumination. The pistol grip design offers supreme comfort in use (especially from vehicles as it gives a traditional lamp feel, yet will happily fit in a jacket pocket), the weight is distributed in your hand, not above it, making it very pointable and controllable.The easy to focus head allows you to vary the width and range of your beam depending on conditions and locations. The new upgraded aluminium trigger switch makes it easy to control your power modes quickly and means you won't be fumbling for the end of a torch in the dark it's always right by your trigger finger!
The new pill design has been manufactured from brass, featuring an extra thick LED mounting base & copper heat pad for better thermal transfer and better performance during long constant use with very low light spill. The tough aluminium construction means this lamp will withstand the worst your shooting trips can throw at it, unlike plastic lamps. Fitted with a new LED line up to deliver class leading performance, you can always achieve perfect illumination levels with minimal fuss via the mode selection/head focus. Our white light XHD LED options gives you the best possible picture through your optics and helps you easily identify your quarry, giving you a full colour spectrum. Available with the LED options below with custom pills made on request.Alpha V2 pills will not fit the original V1 lamp. XHD COOL WHITE WIDE BEAM. XHD WARM WHITE WIDE BEAM. XHD WARM WHITE MEDIUM BEAM. XHD + NEUTRAL WHITE NARROW BEAM.
How to choose the best white led for your task. If you want to quickly cover ground looking for eye shine then the wider beams are a benefit, especially from a moving vehicle as the focused beam is larger allowing you to light up more with each sweep of the beam. The narrow beam XHD+ white is for those wanting ultimate distance for identifying your quarry or taking a shot & works great if lamping on foot for long range spotting. You will get very little light spill with the majority of the light down range when focused into a tight square beam.
The wider the emitter the larger/broader the light beam. How far will the Alpha shine?
A long way, everyone's eyes are different as well as the optics/used/LED choice so its hard to determine down to a specific measurement. Like a NM800 is rated at 800m but its just such a small amount of measure light it doesn't really count & the Alpha is much more powerful lamp. We have chosen specific LEDS for each beam profile point that go further than any other lamps we have stocked. For example most REDs are around 4-4.5Watts the one in the Alpha is almost 12W. This the same for the white LEDs that we use, all are around 12W rather than the 4-5w in most other lamps.
Length 70.5mm (Head)/40mm (Handle)/165mm (Height). Material of Product: Aluminium Alloy. Runs on a single 26650 Battery.
To replace the LED pill simply unscrew the lens bezel followed by the LED pill, both threads are standard right hand threads. 2-20+ hours run time depending on power/battery/mode selected & LED(based on 5500ma cell). Please bare this in mind whilst waiting for your our item.