New Hand Held

Lonsdor KH100 Hand-Held Remote/Smart Key Auto Programmer Simulate/ Generate Chip

Lonsdor KH100 Hand-Held Remote/Smart Key Auto Programmer Simulate/ Generate Chip
Lonsdor KH100 Hand-Held Remote/Smart Key Auto Programmer Simulate/ Generate Chip
Lonsdor KH100 Hand-Held Remote/Smart Key Auto Programmer Simulate/ Generate Chip
Lonsdor KH100 Hand-Held Remote/Smart Key Auto Programmer Simulate/ Generate Chip
Lonsdor KH100 Hand-Held Remote/Smart Key Auto Programmer Simulate/ Generate Chip
Lonsdor KH100 Hand-Held Remote/Smart Key Auto Programmer Simulate/ Generate Chip
Lonsdor KH100 Hand-Held Remote/Smart Key Auto Programmer Simulate/ Generate Chip
Lonsdor KH100 Hand-Held Remote/Smart Key Auto Programmer Simulate/ Generate Chip

Lonsdor KH100 Hand-Held Remote/Smart Key Auto Programmer Simulate/ Generate Chip

Lonsdor KH100 Hand-Held Remote/Smart Key Auto Programmer Simulate/ Generate Chip. Which includes special features and functionality, such as: identify chip, access control key, simulate chip, generate chip, generate remote (key), generate smart key (card), detect remote frequency, detect infrared signal, search induction area, detect IMMO, unlock Toyota smart key and etc. Device dimension: 193MM88MM24MM Screen size: 2.8 inch Screen resolution: 320X240 Battery: 3.7V 2000MAH Power: 5V 500MA Work temperature: -560 USB: USB-B charge-data transfer. Connector port: PS2-7PIN OD3.5 7PIN , 1.27 spacing, the 2nd PIN: NC.

When complete the registration activation, it enters below menu interface. Enter this menu, follow system prompts to operate (as shown).

Lonsdor KH100 Access Control Key. Put KH100s antenna at the ignition type to simulate. Put the types of chip below into the induction chip to operate according to the prompts.

This device supports below chip types. Note: some chip data will be covered and locked. Enter [Generate key] -> [Generate remote], choose the corresponding generate remote control (as shown) according to different regions. Lonsdor KH100 Generate Smart key (card).

Enter [Generate key] -> [Generate smart key] menu, choose the corresponding type to generate smart key/ card (as shown) according to different regions. Connect remote key with remote connector, Put KH100s antenna position.

If inductive signal is identified, the device will make sounds, please check if the position is right (as shown below). Connect remote key with remote connector, Put KH100s antenna close to key. Identification coil, and use key to turn ignition ON. When KH100 buzzer beeps, it means.

Enter this menu, put remote control at the devices induction area to detect remote frequency. Include: detect infrared signal, unlock Toyota smart key, More functions, to be continued.. Put remote control at the infrared signal detection area, press the remote's button once.

When the light on KH100's screen is on, it indicates there is infrared signal, otherwise there is no signal (see below pic). Enter settings menu, and connect the device to network, then choose check for. (5) If the device is faulty or damaged due to any of the following reasons, we reserve the right not to provide service based on the agreed terms(but you can choose paid service). Users find that the product appearance is flawed or damaged, but has no quality problem. Counterfeit, without certificate or invoice, our official back-end system cannot authenticate the device info. The product is damaged due to not following the instructions in this manual for operation, use, storage, and maintenance. Damage caused by private disassembly or damage caused by repair and maintenance of maintenance company unauthorized by Lonsdor. Liquid inflow, moisture, falling into water or mildewing. But with the prolonged time of use, screen damage occurs, such as screen explosion, scratching, white spots, black spots, silk screen, touch damage, etc. The use of special tools and accessories not provided by our company. For the man-made damaged device, if you decide not to repair after we disassemble it and make a quotation, the device appears unstable condition(such as: unable to boot, crash, etc) when you receive it. Private cracking of the system causes function changes, instability, and quality damage. (6) If the auxiliary parts and other parts(other than the main components of the device) are faulty, you can choose the paid repair service provided by our company or our authorized customer service outlets. (7) We will perform repair after receiving your device and confirming its problems, so please fill in the problems in details.

(10) We do not provide sales invoice to individual in any form. Note: After booting the device, please connect to WIFI and enter the following process. Boot the device and enter registration activation process. Then input the code to submit registration.

Account registered successfully, it will take 5 seconds to bind the device. Successful registration, enter the system. Registered user (who has registered Lonsdor products before). Then input the code to submit login. Account login succeeded, it will take 5 seconds to bind the device.

In addition, users who have already registered Lonsdors product can directly choose. [registered user] to activate account. 1pc x Lonsdor KH100 Hand-Held Remote/Smart Key Programmer.

The item "Lonsdor KH100 Hand-Held Remote/Smart Key Auto Programmer Simulate/ Generate Chip" is in sale since Tuesday, September 8, 2020. This item is in the category "eBay Motors\Automotive Tools & Supplies\Diagnostic Service Tools\Other Diagnostic Service Tools".

The seller is "iscanner" and is located in Monroe Township, New Jersey. This item can be shipped to United States, Canada, United Kingdom, Australia, Mexico, Germany, Japan, Denmark, Romania, Slovakia, Bulgaria, Czech republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Greece, Portugal, Cyprus, Slovenia, Sweden, South Korea, Indonesia, Taiwan, South africa, Thailand, Belgium, France, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Austria, Bahamas, Israel, New Zealand, Philippines, Singapore, Switzerland, Norway, Saudi arabia, United arab emirates, Qatar, Kuwait, Bahrain, Croatia, Malaysia, Chile, Colombia, Costa rica, Panama, Trinidad and tobago, Guatemala, Honduras, Jamaica, Antigua and barbuda, Aruba, Belize, Dominica, Grenada, Saint kitts and nevis, Saint lucia, Montserrat, Turks and caicos islands, Barbados, Bangladesh, Bermuda, Brunei darussalam, Bolivia, Ecuador, Egypt, French guiana, Guernsey, Gibraltar, Guadeloupe, Iceland, Jersey, Jordan, Cambodia, Cayman islands, Liechtenstein, Sri lanka, Luxembourg, Monaco, Macao, Martinique, Maldives, Nicaragua, Oman, Peru, Pakistan, Paraguay, Reunion, Viet nam, Uruguay, Dominican republic, El salvador, Ukraine.
  • Supported System: Identify Copy
  • OBD Interface: CAN
  • Type: Key Programmer
  • Manufacturer Part Number: SK273
  • Vehicle Type: Passenger Vehicle
  • Brand: Lonsdor
  • Warranty: 1 Year
  • USB: USB-B/Charge-Data Transfer

Lonsdor KH100 Hand-Held Remote/Smart Key Auto Programmer Simulate/ Generate Chip