Lonsdor KH100+ Hand-Held Remote Auto Programmer Detect remote frequency& IMMO

Lonsdor KH100+ Hand-Held Remote Auto Programmer Detect remote frequency& IMMO. These charges are the buyers responsibility.

LONSDOR KH100+ Remote Key Programmer. KH100+ Handheld device is the latest upgraded version from old KH100, it embraces all the functions that KH100 had, besides, it is far superior in below ways. 4-pack remotes & smart key involved. Optimized power system(faster charge &heat protection). Modern appearance design, in line with the operating habits of the public.

Device system comes with operation instructions, easier for you to use. It covers almost all the functions of the similar products in the market.

Built-in super sensor to collect data(over-range data collection). Exclusive support for 8A(H chip) generation.

Built-in WIFI module, can connect to network at any time 7. Handy chip holder integrated, 902MHZ supported 9. Toyota 8A Smart Key Direct copy to Add key(Latest Update). When complete the registration activation, it enters below menu interface. Enter this menu, follow system prompts to operate (as shown). Enter this menu, you can identify and copy IC card, and generate garage key as well.

Follow the prompts to operate(as shown below). Put KH100+'s antenna at the ignition switch(as shown), choose the corresponding chip type to simulate.

This device supports below chip types: 4D 46 48 47. Put below types of chip into the induction slot(as shown), choose the corresponding chip to operate according to the prompts. This device supports below chip types: 4D 46 48 T5 7935 8A 4C Chip conversion. Note: some chip data will be covered and locked.

Enter [Generate key]->[Generate remote], choose the corresponding vehicle type to generate remote control(as shown) according to different regions. Enter [Generate key]->[Generate smart key] menu, choose the corresponding vehicle type to generate smart key/card(as shown) according to different regions. Search smart induction area Connect remote key with remote connector, Put KH100+'s antenna close to the pre-determined position. If inductive signal is identified, the device will continuously make sounds, please check if the position is right(as shown below). Detect IMMO Connect remote key with remote connector, Put KH100+'s antenna close to key identification coil, and use key to turn ignition ON.

When KH100+ buzzer beeps, it means signal is detected. Enter this menu, put remote control at the devices induction area to detect remote frequency. Include: detect infrared signal, unlock For Toyota smart key, FT for Toyota smart key, Charge key, More functions, to be continued.. Put remote control at the infrared signal detection area, press the remote's button once.

When the light on KH100+'s screen is on, it indicates there is infrared signal, otherwise there is no signal(see below pic). For Toyota or Lexus smart keys from Lonsdor, you can perform the following functional operations: read version info, modify key value, unlock and upgrade program and etc. Unlock For Toyota smart key/detect for Toyota key status. For a chargeable key with battery, you can perform this function.

How to register Lonsdor KH100. After booting the device, please connect to WIFI and enter the following process. 2 Boot the device and enter registration activation process.

3 Input user name, password. Then input the code to submit registration. 4 Account registered successfully, it will take 5 seconds to bind the device. 5 Successful registration, enter the system. For Registered user(who has registered Lonsdor products before).

Then input the code to submit login. 4 Account login succeeded, it will take 5 seconds to bind the device. In addition, users who have already registered Lonsdor's product can directly choose [registered user] to activate account.

How to update Lonsdor HK100. Connect the device to network. Then choose [check for updates].

Screen size: 2.8 inch. Connector port: PS/2 +1.25mm spacing, 6PIN terminal. 1pc x LONSDOR KH100+ Latest handheld device. Each item will be checked and tested carefully by our QC before sent out. Unlimited Technical Service is offered through e-mails, on-line chatting.

Please make sure it is the item you want before order it. Customer Service is not available on Saturday afternoon & Sunday. We are in different time zones, during the working time. If we can not reply to you, maybe we are not in office or we don't receive your letter.

So pls send it again! Your satisfactory is our top concern. We sincerely apologize for the inconvenience caused by time difference. Step2: Leave your comments about this deal. It's very important for us.

E-Check will be held until cleared. It is quick and safe. If you would like to post to other address. Unconfirmed or incomplete addresses given. We sell OBD2 Auto diagnostic tool and professional automotive.

Mechanics with Top Quality, Good Service, Competitive Price. Such as super vag k+can, MVCI, Mini Vci, Ak90 etc. High product quality, reasonable prices. Excellent customer service and a reliable credit standing is our tenet.

Please come back soon and visit us again! Wish You a Happy Online Shopping!

The item "Lonsdor KH100+ Hand-Held Remote Auto Programmer Detect remote frequency& IMMO" is in sale since Friday, November 13, 2020. This item is in the category "eBay Motors\Automotive Tools & Supplies\Diagnostic Service Tools\Other Diagnostic Service Tools". The seller is "supershop2050" and is located in Shenzhen. This item can be shipped worldwide.

Antenna: To induce simulated chip and detect ignition coil
Applicable Regions: No Limitation
Battery: 3.7V 2000mA/H
Brand: Lonsdor
Connector Port: PS2-7Pin OD3.5 7Pin,1.27 Spacing,The 2ND Pin:NC
Connector Port:: PS2-7Pin OD3.5 7Pin,1.27 Spacing,The 2ND Pin:NC
Country/Region of Manufacture: China
Custom Bundle: No
Device dimension: 193MM*88MM*24MM
Display: 2.8 inch color screen
Display screen: 2.8-inch color screen, resolution: 320X480
Features 2: Exclusive support for 8A(H chip) generation,Built-in WIFI module
Features1: Built-in super sensor to collect data(over-range data collection)
Function 1: access control key,simulate/generate chip, generate remote (key)
Function 2: detect remote frequency,detect IMMO,unlock for Toyota smart key
Function List: Identify Copy,Remote Frequency,Special Function,etc
Function List 1: Identify Copy,Chip Simulation,Remote Generation
Function List 2: Remote Frequency,Access Control Key
Function List 3Chip Generation: Chip Generation,Coil Identification,Special Function
High-frequency detection: To identify and copy IC card
Induction coil: To identify, copy, generate key chip or remote, etc.
Manufacturer Part Number: SK273
Model: Lonsdor KH100+
Modified Item: No
Non-Domestic Product: No
OBD Interface: OBDII
Power: 5V 500MA
Remote frequency detection: Put remote in this position to detect its frequency
Resolution: 320*240
Screen resolution: 320X240
Screen Size: 2.8 inch Color Screen
Size: 193mm*88mm*24mm
Size:: 193mm*88mm*24mm
Supported chip types: Please mail us
Type: Auto Key Programmer
USB: USB-B/Charge-Data Transfer
USB:: USB-B/Charge-Data Transfer
Vehicle Type: Passenger Vehicle
Warranty: 3 Year
Work temperature: -5~60