Fluke 1587 Fc 2 In 1 Insulation Multimeter W Fluke Connect 4692740 Brand New

PLEASE READ STORE DETAILS CAREFULLY! FLUKE 1587 FC 2 IN 1 INSULATION MULTIMETER W FLUKE CONNECT. PLEASE NOTE THE LAST UNIT IS MISSING THE PAPER SLEEVE THAT GOES AROUND THE HARD CARRYING CASE, IT WAS LOST DURING TRANSPORT. The high-performance 2-in-1 insulation DMM. The Fluke 1587 FC Insulation Multimeters combine a digital insulation tester with a full-featured, true-rms digital multimeter in a single compact, handheld unit, which provides maximum versatility for both troubleshooting and preventative maintenance.

The Fluke 1587 FC Insulation Multimeter adds four powerful new diagnostic functions through the Fluke Connect® Measurements app. PI/DAR timed ratio tests with TrendIt graphs identifies moisture and contaminated insulation problems faster. Memory storage through Fluke Connect eliminates writing down results, reduces errors and saves data for historical tracking over time. Temperature Compensation through app for establishing accurate baselines and relevant historical comparisons. Historical tracking and trending of assets identifies degradation over time, allows real-time decisions to be made in the field with Fluke Connect® Assets.

Live circuit detection prevents insulation test if voltage > 30 V is detected for added user protection. VFD low-pass filter for accurate motor drive measurements. Auto-discharge of capacitive voltage for added user protection.

Insulation test (1587 FC: 0.01 M to 2 G). Insulation test voltages (1587 FC: 50 V, 100 V, 250 V, 500 V, 1000 V) for many applications.

AC/DC voltage, DC millivolts, AC/DC milliamps, Resistance , Continuity. Capacitance, diode test, temperature, Min/Max, frequency (Hz). Auto power off to save battery power.

CAT III 1000 V, CAT IV 600 V measurement category. Rugged, utility hard case allows you to bring everything you need for the job. Included accessories: Remote probe, test leads and probes, alligator clips, K-type thermocouple. Accepts optional Fluke TPAK Magnetic Meter Hanger for convenient hands free operation. PI/DAR measurements with TrendIt graphs. Memory storage through Fluke Connect Measurements app. Temperature Compensation through Fluke Connect Measurements app. Insulation test voltages 50 V, 100 V, 250 V, 500 V, 1000 V. Insulation test: 0.01 M to 2.0 G. Resistance (0.1 to 50 M). Remote probe, test leads, alligator clips. Accuracy 50 Hz to 60 Hz ±(% of Rdg + Counts).

Accuracy 60 Hz to 5000 Hz ±(% of Rdg + Counts). ±(2% + 3)¹. Accuracy 60 Hz to 400 Hz ±(% of Rdg + Counts). +(2% + 3), -(6% - 3).

Accuracy ±(% of Rdg + Counts). ±(0.09% + 2). Accuracies apply to ± 100% of range. ±(0.1% + 1).

DC and AC Current Measurement. AC 45 Hz to 1000 Hz. Accuracy ±(% of Rdg+Counts). ±(1.5% + 2)¹. ±(0.2% + 2). 600 mA for 2 minutes maximum. Fuse protection for mA input. 0.44 mA, 1000 V, IR 10 kA. Inputs are ac-coupled and calibrated to the rms value of sine wave input.

Conversions are true-rms responding and specified from 5% to 100% of range. Input signal crest factor can be up to 3 up to 300 mA, decreasing linearly to crest factor 1.5 at 600 mA. For non-sinusoidal waveforms add +(2% reading + 2% FS) typical, for a crest factor up to 3.

Accuracy +(% of Rdg+Counts)¹. ±(0.9% + 2).

±(1.5% + 3). 1000 V rms or dc. ¹ Accuracies apply from 0% to 100% of range ² Up to 80% relative humidity.

Display voltage drop: 0.6 V at1.0 mA nominal test current. Continuous audible tone for testresistance below 25 and off above 100. V ac Sensitivity (RMS Sine Wave)¹ 5 Hz to 20 kHz. V ac Sensitivity (RMS Sine Wave)¹ 20 kHz to 100 kHz.

DC Trigger Levels¹ to 20 kHz². 400.0 mV and 2.5 V. 1.2 V and 4.0 V.

12.0 V and 40.0 V. ¹ Maximum input for specified accuracy = 10x range (1000 V max). Noise at low frequencies and amplitudes may affect accuracy ² Usable to 100 kHz with full scale input. ±(1.2% + 2).

±(1.2% ±90 counts). Accuracy ±(% of Rdg+Counts)¹. 40 ° C to 537 ° C. ±(1% + 10 counts). 40 ° F to 998 ° F.

±(1% + 18 counts). ¹ Accuracies apply following 90 minutes settling time after a change in the ambient temperature of the instrument. 0.01 M to 2 G.

50, 100, 250, 500, 1000 V. Inhibit test if terminal voltage > 30 V prior to initialization of test. Operable with up to 1 F load. 50 V (0% to +20%). 0.01 to 6.00 M. Resistance accuracy ±(% of Rdg + Counts). ±(3% + 5 counts). 6.0 to 50.0 M. 100 V (0% to +20%). 6.0 to 60.0 M. 250 V (0% to +20%). 0.1 to 60.0 M.

±(1.5% + 5 counts). 500 V (0% to +20%). 1000 V (0% to +20%).

0.6 to 2.0 G. ±(10% + 3 counts). Maximum voltage applied to any terminal and common.

40 °C to 60 °C (-40 °F to 140 °F). 20 °C to 55 °C (-4 °F to 131 °F). 0.05 x (specified accuracy) per °C for temperatures. Random, 2 g, 5-500 Hz per MIL-PRF-28800F, Class 2 instrument. 2.4 GHz ISM Band. IEC 61326-1:Portable Electromagnetic Environment; IEC 61326-2-2 CISPR 11: Group 1, Class A.

Group 1: Equipment has intentionally generated and/or uses conductively-coupled radio frequency energy that is necessary for the internal function of the equipment itself. Class A: Equipment is suitable for use in all establishments other than domestic and those directly connected to a low-voltage power supply network that supplies buildings used for domestic purposes. There may be potential difficulties in ensuring electromagnetic compatibility in other environments due to conducted and radiated disturbances. Emissions that exceed the levels required by CISPR 11 can occur when the equipment is connected to a test object. The equipment may not meet the immunity requirements of this standard when test leads and/or test probes are connected.

Class A Equipment (Industrial Broadcasting & Communication Equipment). This equipment is intended for use in business environments and not to be used in homes. 47 CFR 15 subpart B. This product is considered an exempt device per clause 15.103. CAT IV 600 V / CAT III 1000 V. Four AA batteries (NEDA 15A or IEC LR6). Meter use 1000 hours; Insulation test use: Meter can perform at least 1000 insulation tests with fresh alkaline batteries at room temperature. These are standard tests of 1000 V into 1 M with a duty cycle of 5 seconds on and 25 seconds off. Size (H x W x L).

5.0 x 10.0 x 20.3 cm (1.97 x 3.94 x 8.00 in). 550 g (1.2 lb). 110% of range except for capacitance which is 100%.

0.44A, 1000 V, IR 10 kA. We are extremely busy, so we might not answer your emails. Items will be replaced or exchanged in case of DOA. All packages will go out after the weekend or after the holidays.

The item "FLUKE 1587 FC 2 IN 1 INSULATION MULTIMETER W FLUKE CONNECT 4692740 BRAND NEW" is in sale since Thursday, December 22, 2016. This item is in the category "Business & Industrial\Test, Measurement & Inspection\Test Meters & Detectors\Multimeters". The seller is "computer_psycho" and is located in Van Nuys, California. This item can be shipped worldwide.

Measurement Category: CAT IV
Modified Item: No
Country/Region of Manufacture: United States
Custom Bundle: No
Features: Auto Power Off
MPN: 4692740
Non-Domestic Product: No
Model: 1587FC
Display: Digital
Brand: Fluke
Test/Measurement Functions: AC Current