WHOLE METAL UHF WIRELESS MICROPHONE SYSTEM. This Microphone system comply with new FCC frequency rules. Professional UHF microphone system delivers clear and loud audio signal and is much more stable than the VHF, 4-channel wireless microphone receiver, Fixed frequency, superior anti-interference ability. Upgraded wireless signal acquisition, 4 antennas can be installed on the back of the receiver to enhance the received signal, ensuring high frequency stability and accuracy.The receiver has four XLR balanced outputs and one 1/4(6.35mm) mix output jack that can be externally connected to a variety of external devices such as amplifiers, mixers, stereos, and more. Better sound quality improvements, separate volume control, and adjustable sound output as needed, making it the perfect choice for any outdoor event such as parties, weddings and presentations. With an operating range of up to 200 Ft.
Both the receiver and the microphone have a high-end LCD display, and the battery usage and working status are clear at a glance. Metal receiver and Bodypack microphone, Provide a better experience. Stable transmission technology, FCC certification and comply with new FCC rules.
The fixed frequency points are: Group A: 504.50MHz, 514.60MHz, 521.90MHz, 538.70MHz; Group B: 553.70MHz, 577.10MHz, 586.70MHz, 593.20MHz. 4 channels can work without interference at the same time. Individual volume controls on each Channel.
Audio mute circuitry for quiet operation. Introducing frequency compressing expanding technique to lower the noise and enlarge the dynamic range. Broad frequency response range, super low distortion. One 1/4 Mixed and four XLR outputs. Range 200 feet (60 Meters).
Number of Channels:4 channels. A: 504.50MHz, 514.60MHz, 521.90MHz, 538.70MHz. B: 553.70MHz, 577.10MHz, 586.70MHz, 593.20MHz.
Audio output:Balanced and Unbalanced. Power requirement:AC 16V, 400mA.
One 1/4 Mixed and four XLR Individual outputs. Clockwise: volume from low to high; conversely, volume from high to low.
Microphone signal strength, microphone channel. AConnect the power adapter to the receiver socket, and then connect the power adapter to the 220V power supply.B Press the receiver power button "1" and the receiver is set to "working" state. 1 Mic XLR socket (BALANCED OFF). XLR cable required: (excluding), you can only connect microphones A, B, C and D to the device separately. 6.35mm plug line is required. A You can connect the receiver to an amplifier/speaker, etc.
B You can only connect microphones A, B, C and D together. Battery:2 x 1.5V battery.
This wireless microphone system works with any PA, loud speaker, mixer, amplifier or karaoke machine that has mic input and mic volume control. And it is ideal for live performances like church, weddings, presentations, meetings, training, public speakings, karaoke or any party. The item "XTUGA A400 Metal Material 4Channel 4 Handheld Mic UHF Wireless Microphone System" is in sale since Thursday, March 14, 2019.This item is in the category "Musical Instruments\Pro Audio Equipment\Microphones". The seller is "tugaproaudio" and is located in Luton. This item can be shipped to United Kingdom.