New Hand Held

Ox Planishing Hammer / Hand Held Power Hammer Autobody, Aviation, Sheetmetal

Ox Planishing Hammer / Hand Held Power Hammer Autobody, Aviation, Sheetmetal
Ox Planishing Hammer / Hand Held Power Hammer Autobody, Aviation, Sheetmetal
Ox Planishing Hammer / Hand Held Power Hammer Autobody, Aviation, Sheetmetal
Ox Planishing Hammer / Hand Held Power Hammer Autobody, Aviation, Sheetmetal
Ox Planishing Hammer / Hand Held Power Hammer Autobody, Aviation, Sheetmetal
Ox Planishing Hammer / Hand Held Power Hammer Autobody, Aviation, Sheetmetal
Ox Planishing Hammer / Hand Held Power Hammer Autobody, Aviation, Sheetmetal
Ox Planishing Hammer / Hand Held Power Hammer Autobody, Aviation, Sheetmetal
Ox Planishing Hammer / Hand Held Power Hammer Autobody, Aviation, Sheetmetal
Ox Planishing Hammer / Hand Held Power Hammer Autobody, Aviation, Sheetmetal
Ox Planishing Hammer / Hand Held Power Hammer Autobody, Aviation, Sheetmetal
Ox Planishing Hammer / Hand Held Power Hammer Autobody, Aviation, Sheetmetal

Ox Planishing Hammer / Hand Held Power Hammer Autobody, Aviation, Sheetmetal
Why an OX Planishing Hammer? The " OX" was developed by Coachsmithing with professional "panel beaters" in mind. If there is a "secret weapon" for sheet metal work and finishing, this is it! My favorite tool by far! This revolutionary tool saves hours everyday! When working on sheet metal projects, I regularly reach for the OX in preference to standard sheet metal hammers. Don't be the last guy to do things the "hard way". Use the Ox Planishing Hammer.

Allen Buresh Owner of Coachsmithing. Beneficial Industrial Applications: Auto restoration, collision, custom and fabrication shops.

Aviation, motor cycle repair, manufacturing and sheet metal shops. Delivers precision blows without bounce back. Operates in a comfortable horizontal position. Fits in the palm of your hand.

Designed to glide over the metal easily producing a high quality finish. Renders traditional "pick and file" metal finishing. Which thins out the metal leaving the panel weaker.

Use with auto body dollies or stationary anvils. Superior planishing of welds, rough formed panels and damaged sheet metal. Good for heavy and very light planishing and forming processes. No more pick and file work!

Easy to master; rapid muscle memory learning curve. No awkward and limiting hoop frames and structures used!

Extremely portable; bring the OX Planishing Hammer to the work project, not the other way around! A llows operator access to difficult areas and large pieces. Greatly increases production and quality, saving hours daily "by the strength of the Ox " Planishing Hammer (Patent Pending). Use with existing stationary anvils and stakes or hand held auto body dollies. The OX Planisher has been used by Coachsmithing.

On many projects including the Delahaye 135, AC Ace and an original 289 Cobra. The Cobra panels were sandblasted before we became involved in the project, leaving it with the original dents and damage as well as all the damage and warping etc.

That sand blasting will produce on thin aluminum panels. The " OX " handles the job exceptionally well, ironing out problem areas quickly and with ease!

Using our unique "Planishing System" we are repairing and planishing the entire body without "pick and filing" and obtaining superior results! Each hammer is assembled and tested " in house". Many of the parts are Manufactured by Coachsmithing in the USA!

We stand by our product! Inquire about Custom OX Planisher packages containing hand dollies with leather and plastic covers. Minor changes in appearance of product possible. Product demonstrations for groups and businesses, p. And "OX Planishing System" work shops available.

History: During the past 39 plus years Allen Buresh, owner of Coachsmithing, has been commissioned to re-body and or refurbish classic Ferrari cars as well as Porsche, Delahaye, Cobra, Lotus and others. As usual, when a refurbishing/ restoration project begins, extensive sheet metal repairs are required. Fabrication and welding in of panels and patches, annealing and straightening of old and tired sheet metal, welding cracks and finally planishing and metal finishing are all part of this exhaustive process. In the past, the standard method of straightening and planishing were employed via hammer/slapper and dolly work, then "metal finishing" by means of pick and file work of the entire car which involved an enormous amount of time and labor to achieve the desired high quality finish.

During this process, the best planishing results were obtained with the hand held slapper used in conjunction with an auto body dolly. This smoothed and readied the material the quickest and most satisfactorily.

While being involved in such a task, the thought of a hand held power planisher came to mind. A unit that could "iron out" wrinkled and damaged sheet metal, without the need to use a pick and file would be wonderful and a "game changer"!

Previously developed "hand held" planishing hammers for such tasks weighed approximately 15 - 25# and consisted of an air hammer mounted on an alignment hoop that positioned a small anvil under the hammer head, this being fastened on the other end of the hoop and the metal was planished in-between. Allen had an entirely different idea in mind. He created rough drawings that envisioned a small, easy to position, ergonomic, light weight tool, that was independent of hoops. Several years elapsed and Coachsmithing evolved into a company that did "one offs", rebodies and complete "ground-up" builds of various classic models. Not knowing what to expect and thinking this could be the "secret weapon" for metal finishing, the hammer was plenty powerful but it proved cumbersome, much too heavy, u.

Sing the smallest hoop the unit weighed at least 15 pounds. Difficult to control and keep in a position that wouldn't crease and damage the sheet metal. Soon afterward, we began developing our own planishing hammer based on the aforementioned drawings. After several more years and prototypes and extensive testing, the patent pending, OX Planishing Hammer is available!

Created by professionals, for professionals and "DIY" in the sheet metal shaping industry. The item "Ox Planishing Hammer / Hand Held Power Hammer Autobody, Aviation, Sheetmetal" is in sale since Tuesday, December 24, 2019.

This item is in the category "Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Finishing Machines". The seller is "theoallen" and is located in Blair, Wisconsin. This item can be shipped to United States, Canada, United Kingdom, Denmark, Romania, Slovakia, Bulgaria, Czech republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Australia, Greece, Portugal, Cyprus, Slovenia, Japan, China, Sweden, South Korea, Indonesia, Taiwan, South africa, Thailand, Belgium, France, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Germany, Austria, Bahamas, Israel, Mexico, New Zealand, Singapore, Switzerland, Norway, Saudi arabia, Ukraine, United arab emirates, Qatar, Kuwait, Bahrain, Croatia, Malaysia, Brazil, Chile, Colombia, Costa rica, Panama, Trinidad and tobago, Guatemala, Honduras, Jamaica, Barbados, Bangladesh, Bermuda, Brunei darussalam, Bolivia, Ecuador, Egypt, French guiana, Guernsey, Gibraltar, Guadeloupe, Iceland, Jersey, Jordan, Cambodia, Cayman islands, Liechtenstein, Sri lanka, Luxembourg, Monaco, Macao, Martinique, Maldives, Nicaragua, Oman, Peru, Pakistan, Paraguay, Reunion, Viet nam, Uruguay.

14:4

  • Country/Region of Manufacture: United States
  • Brand: Coachsmithing
  • Country of Manufacture: USA

  • Ox Planishing Hammer / Hand Held Power Hammer Autobody, Aviation, Sheetmetal