New Hand Held

Hantek 2C72 2in1 Handheld oscilloscope Multimeter tester 70MHz 2CH+DMM 250MSa

Hantek 2C72 2in1 Handheld oscilloscope Multimeter tester 70MHz 2CH+DMM 250MSa
Hantek 2C72 2in1 Handheld oscilloscope Multimeter tester 70MHz 2CH+DMM 250MSa
Hantek 2C72 2in1 Handheld oscilloscope Multimeter tester 70MHz 2CH+DMM 250MSa
Hantek 2C72 2in1 Handheld oscilloscope Multimeter tester 70MHz 2CH+DMM 250MSa
Hantek 2C72 2in1 Handheld oscilloscope Multimeter tester 70MHz 2CH+DMM 250MSa
Hantek 2C72 2in1 Handheld oscilloscope Multimeter tester 70MHz 2CH+DMM 250MSa
Hantek 2C72 2in1 Handheld oscilloscope Multimeter tester 70MHz 2CH+DMM 250MSa
Hantek 2C72 2in1 Handheld oscilloscope Multimeter tester 70MHz 2CH+DMM 250MSa
Hantek 2C72 2in1 Handheld oscilloscope Multimeter tester 70MHz 2CH+DMM 250MSa
Hantek 2C72 2in1 Handheld oscilloscope Multimeter tester 70MHz 2CH+DMM 250MSa
Hantek 2C72 2in1 Handheld oscilloscope Multimeter tester 70MHz 2CH+DMM 250MSa
Hantek 2C72 2in1 Handheld oscilloscope Multimeter tester 70MHz 2CH+DMM 250MSa

Hantek 2C72 2in1 Handheld oscilloscope Multimeter tester 70MHz 2CH+DMM 250MSa
Hantek 2C72 2in1 Handheld oscilloscope Multimeter tester 70MHz 2CH+DMM 250MSa. It continues the compact and lightweight concept but with a new generation of 3 in 1 multifunction tester: oscilloscope, signal source and multimeter; A small volume of the non-profit grip by a single hand. The suspendingstand was designed to support multi-angle adjustment; Ultra-low-power, Type C charging interface, each 2 hours battery charge allow working one full day or standbytwo months.

High-definition color LCD screen display clear and delicate; Minimalist keyboard design simplifyoperation, easy to use. Oscilloscope + Waveform Generator + Multimeter.

This multi-purpose station own three universal test instrument functions. It is outgoing right-hand product for engineers.

Its lithium batteries can be recharged byeither high current-5V/2A or ordinary computer USB interface. Allow while charging, while using, very convenient and handy. Type C charging interface, after every recharge of 2 hours, the device can be used continuously for a full day or standby more than two months. Large-capacity lithium battery power supply. Tesla style 18650 replaceable lithium battery power system, free from replace battery.

5V/2A charger + Type C charging cable. Magic tool and essential function for test newbie. Volume small, one hand holding.

The 45 degree suspension bracket design provide you a work station anywhere anytime. One key page out, quick compare two groups of reference waveforms + 6 groups of waveforms storage, simple and effective. Automatic frequency and amplitude measurement, convenient and worry-free. Its cursor measurement functionsupports time and voltage manual measurement, and measure the required waveforms accurately.

Exquisite and smooth lines make the waveforms clear and undistorted when magnify. Minimalist keyboard design simplify operation, convenient to use.

Fine touch feeling, favorable impact resistance, outstanding heat resistance, easy to disassemble. Free from level drift after long time unused. Voltage, current, resistance, diode, capacitor, on-off test.

Output sine, square, triangle, trapezoidal and other waveforms; sine up to 25MHz. 6K for single-channel; 3K samples per dual-channel.

5ns/div500s/div 1, 2, 5 sequence. 8-bit resolution, each channel sampled simultaneously. Rise Time at BNC, typical. ±3% for Normal or Average acquisition mode, 10V/div to 10mV/div. Note: Bandwidth reduced to 6MHz when using a 1X probe.

±4 divisions from center of screen. 0.2div × volts/div within ±4 divisions from center of screen. Rising, Falling, Rising & Falling. Voltage, Current, Resistance, Capacitance, Diode &On-Off.

± (0.8% + 5). Overload protection: 400mV: 250V, other: 600Vrms. ± (1.2% + 5).

±(1.5% + 5). Frequency of 400V and 600V: 40Hz100Hz. ± (1.5% + 2).

± (1.8% + 2). Self restoring fuse: 200mA/250V, 4A and 10A range no fuse.

± (1.3% + 2). ±(1.2% + 5). 2.8 inch64K color TFT. 320 horizontal by 240 vertical pixels. 100V-240VAC, 50Hz-60Hz; DC INPUT: 5VDC, 2A. 40+71 °C (-40159.8 °F). 3,000m (10,000 feet). From 50Hz to 500Hz, 10 minutes on each axis. From 5Hz to 500Hz, 10 minutes on each axis. 199 x 98x 40mm (L x W x H). Probe1, Clip Probe2, Type Charging Cable1, Power Adapter1, Multimeter Probe1. Probe1, Clip Probe1, Type Charging Cable1, Power Adapter1, Multimeter Probe1. Some areas may take longer (20-40days), such as: Italy, Spain , Russian Federation, Brazil , Chile, Argentina, Thailand local custom clearance factors check. Other countries or remote areas may take longer. Please DO NOT open case , We will work with you to resolve any problem. OR, you may choose to have a replacement. We have always been trying to provide the best service and reliable products for every customer. We will assist you in any way possible and aim to answer all emails.

I believe that communication is the best way to resolve problem. We are committed to provide you with great service. 3Please DO NOT leave us a low score for DSR immediately.

Please note that we are off-duty on weekend, so messages received on weekend will be responded on Monday. Thank you for your support!

The item "Hantek 2C72 2in1 Handheld oscilloscope Multimeter tester 70MHz 2CH+DMM 250MSa" is in sale since Monday, July 9, 2012. This item is in the category "Business & Industrial\Test, Measurement & Inspection\Analyzers & Data Acquisition\Oscilloscopes & Vectorscopes". The seller is "ameliazhou" and is located in ShenZhen.

This item can be shipped worldwide.

  • Model: Hantek 2C72
  • Maximum Real-Time Sampling Rate: 250 MSa/s
  • Features: Handheld/ Portable
  • MPN: Does Not Apply
  • Brand: HANTEK
  • Maximum Bandwidth: 70 MHz
  • Digital Oscilloscope Resolution: 8-bit


Hantek 2C72 2in1 Handheld oscilloscope Multimeter tester 70MHz 2CH+DMM 250MSa