Print parameters Printout height from 11 to 57 mm Height of object to be labeled from 39 mm to 115 mm Number of text lines in one run: Up to 5 lines (for 5×5 dot text matrix) Print lining using multiple lines in one design: up to 10 printouts in one project e. Various contents in different places on an object Printhead 32 nozzles Standard nozzle diameter: 150m Optional: 120m, 170m, 200m Height of object to be labeled: from 39 mm to 115 mm.Print synchronized with speed of lower guide roller Memory Amount of texts with print parameters is limited by printer memory 2 GB, as standard Special registers Dynamically adjusted text content in response to an event or action Date and time in any format Valid thru datei Counter: Count up Count down Cascade counters Bar codes Data sent from external devices and computers e. From databases Battery and Power Estimated run time with battery fully charged Up to 16 hours Calculated for 60 printouts of 1 m in length, 550 dots/meter per hour, at about 20°C.
Power supply Battery 6 LiIon battery pack. Capacity: 4400 mAh Automatic low-battery charge. Battery re-charging Automatically with the power adapter DC 24V / 1.25 A Charging time under 300 minutes. Inks based on acetone, ethanol, MEK or water.
Capacity of ink container: 200 ml Fonts Built-in TrueType fonts and EBS fonts in matrices: 32×24, 25×19, 16×10, 12×7, 7×5, 5×5, China11, China16 Graphics (logos, special characters) Texts and graphic symbols can be edited and printed with True Type fonts and UTF-8 coded (for inclusion of regional alphabet characters). Graphic symbols, warning or transport marks, etc.
Free raster graphics up to 32 dots in height. Technical parameters Position and attitude of printer in use: Any Operating pressure: 0.015 MPa up to 0.045 MPa (0.15 bar up to 0.45 bar) Operating temperature: from +5°C to +40°C Storage temperature (over longer time): From +1°C to +45°C for printer with water-based ink From -10°C to +45°C for printer with inks based on MEK or ethanol. Humidity: up to 95% without steam condensation for temperatures above dew point (it can operate when it rains, as long as printed surfaces are dry).The item "EBS-260 Hand Held InkJet Printer 32 nozzle 56mm Print Height with Ink & Cleaner" is in sale since Tuesday, November 6, 2018. This item is in the category "Computers/Tablets & Networking\Printers, Scanners & Supplies\Printers". The seller is "bradechemltd" and is located in Aberdeen. This item can be shipped to United Kingdom.